Registration The GCC Group

Today I will try to show the course of creating an account on the portal The GCC Group . It does not differ from all the other portals profit. Let's get to work. To register, we must first go to the GCC. Underneath I've included a link to the page. This is my referral link and if you register to use it. You will find in my structure.

https://www.thegccgroup.com/?ref=pawelbudda1979 

Page appears as shown below:

1. To register, we can choose one of the options shown in the figure above. The website is in several languages ​​so everyone will find something for themselves. Unfortunately, if you select the language on this website we are going for the next again we will have to select the corresponding language. Well, unless we use the English language because it is the default language here.
2. When you click one of the options above appears to us a window shown below

Sorry to go to the next stage of setting up an account, select one of the available packages. Even here you can see that, unfortunately, this is not a free program. For something you have to decide. Quite frankly, the current I act in several programs that do not require their own contribution and as yet little of it I have. Of course not all, but most. I chose a package type. The following describes each of the available packages:





1. 3D EDU PACK - this is the lowest of the 3D packages. It is a package of pre-print
   
   3D The package includes a free 10% discount card Ecoststem24 and 150 GCCcoin. The cost of this package is 38 euros. This is a package designed for people who want to enter into the project, but either do not have the funds or not fully convinced are into it and want to check a relatively small contribution to what are the possibilities of achieving the benefits. In addition, the purchase of this set by a registered get another 18 points PVC. What are these points I tell in later posts.


2. 3D TRAINING PACK - like the previous one is called the initial package to
   
   3D printing. Its cost is now 138 Euro, and the package you get an additional set of 3D models. In addition, we also get included as in the previous package free 10% discount card Ecoststem24 and 600 GCCcoin. After purchasing the package by registered accrued We will also be 84 points PVC. This is the first package in the beginning to see the possibility of printing in 3D.


3. 3D FUN PACK - is the extended version of the previous package. The cost of this
   
   package is 438 Euro. This is not a small amount, but apparently it is still the most popular option, which selects the most people. The price we set pen 3Doddler 2.0 and a set of models. In addition, the package receive a free 10% discount card Ecoststem24, as well as the 2500 GCCcoin and 238 points PCV when the package buys your recommended. In this package really we start to play 3D because we get the first tool or pen so that the hard way, we can feel what is it all ..


4. EXPLORE 3D PACK - another course more coolest previous edition 
   
   package. Its cost is already Euro 1838. In addition to the price of a set of 3D models also get a 3D scanner. These devices in a relatively simple manner can reproduce and save around us matter in three dimensions. Of course, along with a set of receive a free 10% discount card Ecoststem24, and GCCcoin 14,000 and 888 points for the purchase of PVC package by registered mail. Of course, free of charge still a lot of satisfaction when scanning the space surrounding us.


5. 3D PRO PACK - already penultimate package worth 2,838 Euro. For many people the
   
   price knocks, but the price is basically the main product promoted by the GCC Group, which has just 3D printer. It is a small printer allows you to print objects about the size of 21x30x21 cm. Interesting idea and can no longer be used to make things because of such dimensions can have a lot of print and then sell it. Together with a set of receive a free 10% discount card Ecoststem24, as well as 20,000 GCCcoin and 1,288 points for the purchase of PVC package by registered mail.


6. 3D MASTER PACK - here the cost is for me a very Large Star -LCD because Euro 6838
   
   but Instead, a whole set of devices for professional 3D printing. It is therefore a printer, a scanner, a pen, a set of 3D models and 3D filaments, meaning that the materials used for printing. Of course, the kit comes with a bonus, namely the free 10% discount card Ecoststem24, and GCCcoin 55000 and 3088 points PCV when the package recommended buys. This package is already full of professionalism and the ability to print everything scanner scans and overall dimensions accommodate the printer.


7. AFFILIATE ONLY PACK - this is the package for the price of 88 Euro which authorizes
   
   us Attachable his team. If you seriously want to build your team its structure is the package we needed. Interesting information is that during the registration will buy one of the packages 3D is the package we purchased at a promotional price of 50 Euro. This is a one-time promotion, so when you log in, or is no longer available.




With these options we have to choose one option. I personally recommend one of the 3D packages and by the way, and a promotional price package AFFILIATE. The decision is yours.
3. The next step is pressing the button BUY NOW underneath the package chosen by you. 
   
4. Previously, if you want to learn something about what we buy button is pressed When pressed, will we close our package as shown below:
   
5. When you click BUY NOW move finally to the registration form, which is below. I will try to describe in turn each of the form fields
   


1. In this field, a link is our sponsor or the person who introduced us to this program. If this is not the person who gave you the link to have contact and ask again about the link of the person by which you want to register for the program.
2. In this field, we give the name of the user which we will use when logging.
3. In the next field we give our e-mail.
4. In turn we give name,
5. This coin will say something about what we should do right at the beginning when you get us a registration form, namely the right of the name of the package that we chose. Let's see if you are sure this package. If not, change it right away. When in fact we move on this button and wrodzimy to choose the package that later we will have to start entering data from the beginning
6. Then we give the name.
7. Here we give their date of birth and, in principle, choose it;
8. Next, select the country of origin.
9. Sequentially City.
10. Next we enter the address,
11. Then, ZIP Code or ZIP depending on the country in which we live.
12. Sequentially country code in which we find ourselves.
13. Here we give a phone number.
14. Here, mark, if we register the project as a company.
15. Then choose the sex.
16. We accept terms and conditions. Top before you read it, it is long but worth a read teeth then do not have a grudge against the company.
17. Once you are sure that everything filled out correctly press the button SUBMIT and record in the program THE GCC Group.
6. After registration appears to us a window with information on receiving a discount. It looks like below. Sequentially press the button NEXT STEP and go on:
   


7. Shows on another window as shown below
   
   :
   I personally have done a step 7 but it seems to me that I could take advantage of the promotion
8. If you have the opportunity to buy for a package AFFILIATE because for the price it is no longer available later for you, and gives it additional powers.
9. After step 7 are already members of the community GCC Group. In order to obtain login data przejdxcie to his post which you gave during the registration processes.
   
   You'll find an e-mail from the GCC informing us about the data our sponsor and our login data and link the reference by which we will be able to create its structure referrals.

In this post so much. In the following I will show you how to make a transfer for our first bought a pack of 3D. I must admit that even probably never run this blog since I had not much time to devote to writing one post. This is due to the fact that the program itself contains many options that writing all this for less gives no guarantee that it will be well written. On the web you can find some materials on this project. Read and listen to them carefully because it is very easy to get lost. Well, I will try as far as possible and the skills to pass on this blog as much information and detail as possible, so that people who read this have a broader concept of what is here for the moment for a while will happen. How do you want it joins and learning from scratch 3D technologies. I will add only the company at the beginning of April 2017 plans to go public and then find out how much it is really worth GCCCoin. Wedel me now is the best moment to join this project. Therefore, given once a link to the nick is registered. https://www.thegccgroup.com/?ref=pawelbudda1979.  If you want to contact me my data is on this blog tab for inviting me.