WHY GCC COIN DISAPPEARED FROM THE WALLET?

As the title all became clear, though these explanations probably many do not like.Of course, I also have mixed feelings 

After writing the third time to support the GCC received information that explained everything:

It follows that for a month blockchain did not work because the errors were found in the portfolio in the portfolio. Well, all right.I just wonder how it is that blokchain is locked and the portfolio further copies.   

Knowing all this, who had run portfolios for the period stated in the message must reckon with the fact that after his reinstallation whether the installation of new or old versions coins portfolio are those that dug in this period unfortunately disappeared. In my case it was some 40 transactions.  

I came to the conclusion that in spite of all these things can happen, but unfortunately probably not quite been presented early on this information GCC Group. 

Unless he missed something.

IMPORTANT INFORMATION REGARDING THE NEW PORTFOLIO OF GCC

Hello For some weeks GCC Group has released a new version of the portfolio, which I described in a previous post. Version 2.3.0.0 was to eliminate errors of the previous version. Of course, I installed wallet, but unfortunately there were problems:

This problem is "pernicious in my case 45 maining transactions" in the period from 6 October 2018 until 14 November 2018 year. Although the wallet was turned and kicked it, unfortunately, when you synchronize a new version of all transactions from this period they have been cut. 

I wrote to support the GCC and we are still in touch, but so far there is no solution to the problem. Well, I think the guys from the GCC will soon come up with something but I do wstrzymałbym to update the portfolio. 

I have not written right away because I thought that my case is individual but I think it is not. I keep my fingers crossed and hopefully as soon as something became clear. At the same time immediately after receiving new information from the GCC share them in future posts.

UPGRADING GCC WALLET TO 2.3.0.0

Hello

Recently, all community members have received the GCC mailbox information, which is as below.

Who has not noticed let you have a look to your e-mail inbox. Information says more or less that from 12 November 2018 a new version of a portfolio of GCC. 2.3.0.0 . It was introduced because of the errors found in the existing portfolio. Anyone who will now want to make some trades GCC will have to have installed a new version of the portfolio.

As for the portfolio he looks essentially the same as the previous version. The rules also its installation are the same. Starting from making copies of the portfolio and ending his re-uploading. Link to Post Updated portfolio

IS GCC COIN SEE ON THE NEW MARKETPLACE?

This question of a few days may ask themselves a community which in their portfolios has just this crypto. And what's going on? A no about it that was formed a kind of competition which currencies will be able to rotate on the stock exchange called CoinDeal .

And how to make our crypto found on the new marketplace? Very simply, so the one who has an account on CoinDeal let them vote for the GCC and the rest well zarejestrujmy and let us help to the GCC market extended its audience. So to share.

New website GCC Group

Today, information about which I knew while in the GCC in Przeźmierowo. Well, GCC Group has a new website.

Homepage looks pretty cool and let's see what you see after you log in:

Immediately you see the difference and it is significant.

1. Here we see the state of our account in EURO.
2. Successively the state of our GCC Coin coins which we received and we still have on the page.
3. Here we see the current valuation Coin in EUR.
4. At this point, we can see how many people are present at the moment we are in our upper leg.
5. The same applies to information about our lower leg.
6. At this point, we can buy for someone so-called gift in the form of ANY 3D packages.
7. Here is information about special offers we have prepared for the GCC Group.
8. This item informs about the accumulated points on our account PVC.

9. going into this field, we can learn a little about our payments. .
10. This field shows us our position in the structure SINC ..
11. Here we see the number of points gained BV in the upper leg.
12. Here we see the number of points gained BV in the lower leg.
13. In this field, we see the number of people directly referrals.
14. Here we can see if we are a member of the project with full privileges or not opłaciliśmy its AFFILIATE package.

As you can see page differs radically from the previous version. All the information we need, we have now in one place and basically immediately after logging in to your account. Reszce bookmarks can quietly view but are very clear and simple. 

I immensely enjoyed the fact that in the end after the mess I began to reign on the old version of the page something has gone forward and now everything is nicely arranged. Keep it up. Let's see whether we will see only language versions of the page GCC Group.

Vacation is over but the memories remain

Hello to all of you for quite a long time I did not write anything on your blog but I was on vacation. In his last post on GCC Group I wrote that the next time I'll try something surprise you. Well, today I can say that coming back from vacation and I was in Gdansk, Poznan decided to return for, and exactly as already probably guessed by Przeźmierowo or established GCC Group.

I came to Przeźmierowo on Thursday 23 August, unfortunately ride from Gdansk through Gniezno took me so much time that the company and the restaurants were already closed. Immediately for those who choose to see and participate in the reports that the company is open from Monday to piątko from 9.00 am to 17.00. Within the same time slot is usually open the 3D coffee located in the same building. Not discouraged by this I came to Przeźmierowo the next day when the morning. Here is my brief photo report:

The cafe was the daughter who just like I wanted to see how such a room, almost everything here is the fruit of the work of printers. Interestingly though my child does not ask why omieszkało juice which kopiliśmy in cafes and coffee are not printed. Maybe next time we are in Poznan that happens. 

As you can see in the pictures in many places in the pictures are shown a 3D printer

A glance here buffet: \

And of course the shop where you purchased the printer and components produced using them. in the third picture reflection of my daughter, who also snapping photos to show her friends.

A still image below the zone for employees only. Unfortunately, there is no longer walked. maybe if I had an appointment in advance but unfortunately I was unlucky because I tried several times to get through to the GCC, unfortunately, each time without success.

And now the final picture of a visit to the GCC Thank you for a very nice atmosphere with the person who told us a little bit about us about 3D cafes and provided us the possibility to see and take pictures. Thank you very much, and certainly at the next opportunity will definitely be attending more in Przeźmierowo.

And what it gave to me you ask? Exactly a lot because a man very different looks at the business in which to engage the touches that from the inside, tangibly see that it works and works and that it is the same only come there other people and also engage in work sometimes drinks coffee, they talk about their businesses and they just are. Since Friday, August 24 my outlook on the company GCC Group took on additional meaning and now I know that I'm a part of something real that in the near or slightly more distant future will pay off for me.

Two interesting new packages on offer GCC Group

I did not write anything long time because I do not see the topic about which I had to write about the GCC and the two finally began to take a vacation and that is an example of the little daughter doing 😃. Recently, however, they appeared in the shop the GCC offer two new training packages. They seem to be quite interesting. Briefly introduce each of them.

1. POWER-UP-6 - 6 package is training that takes a live one every month. On-line training have lead experts who are connected with GCC Group company. They cover various aspects of the business, among other things:
• sales training,
• product training,
• training in the field of 3D printing,
• training of crypto-currencies
• blockchain training.



Includes buyer receives:
• Six-month subscription - access to professional training 6 online live !,
• Additionally - free E-VOUCHER Coins the GCC to 70,000.
the person through which you purchased it receives:
• make 7000 the GCC,
• 94 points PVC
2. POWER-UP-12 - is a package of 12 courses, which take place at one time each month. On-line training have lead experts who are connected with GCC Group company. They cover various aspects of the business, among other things:
• sales training,
• product training,
• training in the field of 3D printing,
• training of crypto-currencies
• blockchain training.



Including the buyer receives :
• The annual subscription - access to 12 professional training online live !,
• Additionally - free E-VOUCHER Coins the GCC to 140,000.
whores person to make the purchase receives:
• 14000 to make the GCC,
• PVC 188 points,

There is important information about the two packages: 

• You can not buy them for GIFT Certificate
• before the number coins why is the word FOR? And because we have to get coins for purchasing products, the company will be buying in the market and their exact number will depend on the value of the GCC crypto-currency sales at the time of posting. As a result, GCC Group wants to increase turnover on the stock exchanges in the coin by its value. If you buy 1 package will be converted into coins amount of $ 200 in the case of 2 400 US dollars package. while 10% of these amounts will be converted into coins that sponsors get people who bought products.

That's it for today, now a longer break because going on a vacation and after him I might be able to surprise you, wait-see. Powodzonka.

The most interesting device printed in 3D

Because at the moment I do not have anything interesting to write about the projects in which I participate I decided to encourage to deepen their knowledge about what can be printed using a 3D printer. and they are really cool and interesting device:

Solar Stirling engine

It is a heat engine, which is known for quite a long time. Robert Stirling has developed and patented it already in 1816. This machine has won recognition only recently, however, through the use of solar energy conversion. If someone wants to put solar Stirling engine in your own home - no contraindications for doing so. The easiest way to buy a set of plans, for example, from RepRap windturbine , then use the 3D printer to prepare their own model. 

Car

Strati tojeden of several cars printed in 3D technology. Electric vehicle was developed by Local Motors . Obviously not all the vehicle has been printed. It was founded on the printer interior, a large part of the body and almost all the trim. The engine, chassis and electricity are derived from an external supplier. To perform the largest components were used for the professional large format printer, prepared specifically for this project. Scattering the up to 50 km / h, the car is available for sale since 2015.

Block of flats

Company Winsun is the first developer offering residential block printed in 3D. Five-storey building has been divided into apartments and rooms. Printed was also impressive façade, which imitates brick with granite finish. Of course, the printer is not out of the building immediately, but its elements in the form of prefabricated Winsun not print only the elements of woodwork or metal components.

As you can see, in principle, you can now be printed on almost all 3D printers. On the one hand, we know that such printing thi certainly time consuming, but on the other hand to carry objects made in this technology are needed less and less employees. 
Well, watching this stuff we must answer the question of whether we want to participate. I think that should be interested and the GCC Group gives ample opportunity for doing so.

It's probably the definitive end of World MX - Payments on hold

Unfortunately, after several days of operation MX World again he stopped payment. It turned out that the $ 40,000 paid by James was spread at a rapid pace, which to be honest he did not expect.

On the FB program can read information from James what to withhold payments. The following statement James made available by Janus on FB . 
So sadly wall to admit that this was probably the end of World MX. This is what I gathered there I will try to spend on advertising their platinum think at this point the only internet business that is GCC Group .

Well and it could be really interesting. A little sad because it's in all my first online business and I will always think of him with affection.

MX World pays again

Hello

Today, about which in truth I have little forgotten here, but it turns out that it starts to work again. I am talking about the MX World . While it descended because quite a few months but is once again available to the payment window.

Payments can be made in USD and EUR. At the moment the payment is frozen at BTC. At the moment there are three payment processors to payments:

• SolidTrustPay
• Perfect Money
• AdvCash

The amount of payments depends on the level that we have bought in the MX World. Minimum weave is 25 USD or EUR

As shown in the picture above the red arrow depending on the level at which we find ourselves, we can pay different amounts from 25 to 125 USD or EUR.

It's nice that after such a long time, something began to happen. I personally am sentimentally linked to the MX World because it's my first work Internet;). I hope that now everything will go forward. And how will, in fact, time will tell. 

GCC Group issued WHITE PAPER

Today, according to me important, and even very important information, so the company The GCC Group officially released something called Whitepaper . At the beginning I started to wonder what it is and whether it even makes sense. I began to search the internet thinking that maybe I encounter some information about the document and after a while I already had a few pages of a search engine. 

And what is that?

White paper- an official document containing systematized data on the area of ​​your business. Reports are to transmit customer information, and does not serve the sale or promotion. Marketing objectives are implemented as secondary by strengthening the profile of expertise and building brand awareness, which is the author of the study. White papers are written in an official, specialist - are of scientific studies. Outriggers to create them are research and analysis. The document must therefore expect the data, their systematization and interpretation. Systematize data for reports often use graphs and tables. They are usually reported the company's achievements in the area of ​​its activity. Informing about the results of the work builds brand credibility and generates trust of our customers. Very often people

By clicking on the picture you can download a whitepaper published by The GCC Group

At first I thought that he would try to translate this document, but while reading rump realize that this does not make much sense because sometimes poorly translated one word can change the meaning of an entire sentence, or even sometimes a paragraph. So I will say briefly. In the case of The GCC Group whitepaperis a summary of the company's development from its inception to the present, as well as plans for the future which the company intends to carry out.

You wonder if it's good?

In my humble opinion, of course it is because it shows the whole environment that the company has an idea for its development and wants to pursue posed in front of goals, and the resulting document gives everyone the ability to track achievements of the company and compare its achievements at the moment with folded in the whitepaper aims.

Well, so much for today and for the next post.

Interruption C-Cex

Today short, but quite important information for users of the exchange C-Cex. Now, from May 31 for a period of three months will be restricted functionality of the stock exchange. What does it mean that we do not know. It is known, however, that such periods have already occurred in the operation of the C-Cex. Last for a long time it was not possible to register, were also locked when deposits and withdrawals. 

I will say honestly that it might upset a little but if necessary you can always register on another stock exchange. Then we have the other 3 available exchanges on which you can rotate our GCC. Sisal about them in the previous post .

Cryptopia - Another GCC stock market exchange

Long did not write anything.

Maybe it's because I had a little moment other activities, but also because, again, that there was a period where not much was happening in the world of the GCC. What was the true event, but basically do not know if many people were interested in it, and basically what you had is probably participated in it. 

Now there was another step that is entering the GCC Coin on another stock exchange called Cryptopia . In fact, browsing the Internet I found a lot of information on this exchange.

I do not know whether the stock market is good. They write about it differently depending on what crypto rotate. Well, it is certain that our GCC is thus available to a new group of users who have their accounts on this has just the stock market. .

From now on our GCC it is available at:

1. NovaExchange ,
2. C-CEX
3. OctaEx
4. Cryptopia

I see it getting better. Let's keep our fingers crossed for crypto, but do not forget to promote the most important in the GCC namely printing and 3D packages.

Problems in the GCC - compromised Web Wallet and VAT in the European Union

Hello

Today, unfortunately, the average information for people interested in the GCC. For a long moment I wondered whether to write about on the blog, but in the end I try to lead it honestly so it would be wrong if I did not give this information, which is certainly not congest recognition GCC Group.

This November was published on the facebook group which operates in the GCC Group. Well, what does it mean? And no, that someone broke into the Web Wallet GCC and the people there that held funds stolen several million coin GCC. Unfortunately, it turned out that the portfolio ie have sufficient security. The company in the list provides that 80% coins managed to block a sale, and the remaining 20% ​​of the company will return the wallets. Of course, some coins is these 20% were sold on the stock exchange C-Cex. 

At the moment portfolio of web based work which is not understandable. I think that after the introduction of additional security again for some time it is run. 

The second equally sad thing is that probably all the information that is in the community living in the GCC Group and the European Union today, they got to their email box is this, that since 1 May 2018 years packets sold in the EU will be subject to VAT. You have to expect that this, unfortunately, but package prices will go up. Sure it's still difficult and so for quite some time which is a difficult task and advertising packages to encourage the purchase .. 

Unfortunately, today introduced two uninteresting information about the company. As far as the latter does not depend on the GCC Group, unfortunately, this is the first seems to be the result of niedopracowania from the company, which will definitely not cause her followers. Let us hope that this will not have long-term effects and in a short time course Coin come back on the right track.

OctaEx - another exchange crypto currency exchange allows BTC to GCC

Recently, our cryptocurrency can be purchased on the three stock exchanges. To C-CEX and NovaExchange joined Chinese OctaEx . Curious about what the stock market can be said except that when you open the page appears on a lot of it incomprehensible bushes? Well, in the end the Chinese stock market is so you could somehow explain these bushes. Besides very simple you can go on one of the four languages to choose from and trouble disappears.

While it is interesting and it was my first observation, that the stock market valuation of all cryptocurrency held to 6 decimal places. The other two exchanges mentioned above and calculate the value of the cryptocurrency to eight decimal places. And how does she look like? See for yourself.

In this window you will see the GCC valuation on the stock market at any given time, and trading volume. The idea seems pretty cool because the Chinese market because the number is certainly attractive. Compared with other exchanges with in due to the previously described amount to zero decimal pricing GCC is probably a little inflated. 

The more exchanges, the better for GCC because it can be in more places her turn, and this may lead to increase in value.

Yet all the time waiting for input on a larger stock exchange BitBay for example, and this can occur after a GCC Group announced the event which starts on Thursday.

Printers store GCC Group and the last part V

In this post I will describe the latest models of 3D printers already available in the shop the GCC. this time will be 3 printer, where you can take a look:

9. Wanhao plus D7

Description and specifications of the printer

10. Wanhao I3 MKII

Description and specifications of the printer

11. they Panospace

Description and specifications of the printer

That's all printers currently available in the shop the GCC. I think that the choice is wide and each of willing something for everyone. All welcome to work in a company that I think has a great future ahead.

3D printers from GCC Group IV honor

Today, after a short break, two more news from the shop the GCC. Both overall dimensions are a little bit smaller than the previous, but also presents interesting.

Below the last two printer families Creality available in the store GCC Group.

7. Creality CR-10s 300

Description and specifications of the printer

8. CrealityCR-10 Mini

Description and specifications of the printer

I wrote two more printers. In the next post I will show you the last three printers that are available on the GCC.

3D Printers III

Today, two more printers offer GCC Group. My attention returns especially CR-5060. But why? Through the size of the space to print. Thanks to these capabilities, you can now print really big items. 

5.  Creality CR-10S 400

Description and specifications of the printer

6. Creality CR-5060

Description and specifications of the printer

Well, I described another two printers, and it's still not the end. Next the device in the next post.

3D Printers Part II

In the last post I introduced two new printers offered by our company. Today, the next time the two devices in the family Creality:

3. CT-10 Creality 5S

Overview & Specifications Printer 

4. Creality CT-3040

Overview & Specifications Printer

Calikiem cool device which can already be quite impressive print projects. Especially the first to print body measuring 50 cmx50cmx50cm.

The new 3D printers in the shop the GCC

Hello

Last post, I wrote that we went in the week titled " Silent Crickets ... ". Hardly something I wrote and already in the topic and moved it in the best sense of the word. As you know GCC Group is primarily a project for 3D printing. So the time came to deliver the GCC community and the world of new printing devices in three dimensions. Previous printer does not deceive ourselves were not at the highest level. Now it's from which to choose. In the next few posts I will try to bring the printer models available for sale in the shop the GCC.

In these posts I will not describe each printer. Only I'll put her photo and attach a file with the product specification. So that posts are not too long in any of them will refer to the printer 2,

Now we'll begin:

1. CR-7 Creality

Overview & Specifications Printer 

2. Creality CR-2020

Overview & Specifications Printer 

Today, these two printers. I think it starts pretty cool, and another two devices in the next post.