The next step for the dissemination of 3D pronting

Today, a few words about the weaknesses of 3D printing, or rather their "extinction". Well, the main drawback of 3D printing severely limiting its use, for example in the industry is that print has a porous structure, and thus need additional treatment to be sealed. In other words, in an article printed 3D printers can happen micro slits that pass liquids. Horizontal stripes on the walls of the models is the domain of low-cost incremental technology. Due to the most common range of height of the layer of at most 0.1 mm to 0.3 mm, they are most visible in the case of FDM technology. Smoothing their sleepless nights not only the most ardent aesthetes, but also those who print in this way the finished products.

Methods to obtain a smooth surface of the 3D model is a few. We can choose both the mechanical processing and chemical. Mechanically we printed our object, for example, sandblast or grind, in the case of chemicals we can use them to interact indirectly through acetone vapors, or directly covering the surface of various substances. Each technique has its pros and cons. Machining requires a lot of time and effort, and chemical treatment adversely affects the reproduction of the smallest details, making it become less pronounced.

The method developed by the Japanese

Scientists in Japan have developed their own method, which does not require much effort, or does not reduce the detail of the 3D model. They called it Chemical Melting Finishing 3D (3D-CMF). It involves using a special pen tip reminiscent brush. Thanks to the surface is applied a thin layer of a chemical agent which does not function as aggressive as for example acetone. With such a

All tests have been focused so far on FDM technology, because it is the most widespread, especially among non-users, and above all, however, is the method in which this problem is most visible.

The main advantages of using 3D-CMF hut is tedious necessity of removing the bands by their resistance, which in a small degree also contributes to lower material loss, otherwise the amount of chemical used is much smaller than traditional methods. Thanks to the tips of various sizes we are able to suit a particular type of surface.

Although so far there is no information on the commercialization of new technology, 3D printing smoothing it, it could become an ideal compromise between mechanical and chemical treatment. 

Zortrax Apoller - a system for automatic smoothing of 3D printing? 

Zortrax introduced a new hardware device - equipment for automatic smoothing output of thermoplastics.

Apoller is an intelligent device which allows automatic smoothing models made with 3D printers selected thermoplastics. The final effect of smoothing is nothing new - for many years, this process is used by many amateur low-budget 3D printing, however, the way to this approach, in many cases leaves much to be desired in terms of health and safety rules (or rather their complete lack of ...). 

Apoller was based on its own proprietary technology, smoothing - The Smart Vapor Smoothing (SVS). Working chamber of the device is 300 x 250 x 250 mm and thus is able to accommodate the vast majority of the details printed on the top, desktop 3D printers of type FDM / FFF. The chamber is airtight and double-sealed, which eliminates any risk of accidental chemical vapors to escape to the outside. The paper uses acetone or MEK, which are stored in tanks embedded inside the device. 300 ml of solvent sufficient for several hours. The process is fully automated and takes a total of three hours, thereby a day Apoller details can smooth the resulting four 3D printers, a standard working area (20 x20 x 20 cm +/- 3 cm).
And so it looks smooth element of just leaving the p device.

For now, so we can smooth certain types of filaments, but it seems to me that the question of the future is to find a way to smooth and seal micro slits in each of the possible printing materials. When writing this post I suggested in large part to the materials found on websites such as:

• 3D printing center
• 3D printing center

AIRDROP CTX HOLDERS GCC COIN

Today something a little different barrel with little curiosity for people who have coiny GCC and treat them long-term investment, which are called. Hodlerami GCC. And as this is exactly look like? Well, GCC Group opens its IPO cryptocurrency called  www.Caytrex.com . In early January, the GCC announced on channels that will soon appear on the market Airdrop CTX (token) - only for those who have in their portfolios GCC currency .

What is Airdrop?

Airdrop, czyli inaczej „zrzut” to funkcja napisana w języku programowania, które na wybrane adresy w systemie opartym o blockchain wysyła informacje. W tym przypadku o „zrzuceniu” nowych tokenów. Deweloperzy projektu, którego waluta będzie ‘zrzucana’ na portfele, zapisują aktualny stan blockchaina (poprzez zrobienie ‘zdjęcia’). W zależności od ilości posiadanych tokenów w naszym przypadku GCC Coina, dostajemy określoną ilość nowych tokenów CTX. Dla przykładu – posiadamy 60 gcc, a więc otrzymujemy 1 token CTX. Proporcjonalnie – gdybyśmy posiadali 600 GCC – otrzymalibyśmy ich 10.

Czym jest CTX?

To oparty na blockchain Ethereum token, który pojawi się na giełdzie Caytrex, uruchamianej przez GCC w pierwszym kwartale 2019.
Mówiąc najogólniej Giełda Caytrex ma być przyjazną, prostą dla użytkowników giełdą kryptowalut, która dzięki wprowadzeniu programu Smart Coins Alliance będzie wspierała aukcje i promocję wysokiej jakości projektów. Giełda będzie miała swojego własnego coina, czyli własnie właśnie CTX. Token będzie służył do trzech celów:

• niższej opłaty za transakcje na giełdzie, Caytrex będzie miał CTX Token tak Fbijak giełda Binance ma swojego Binance Coina
• jako metoda płatności za usługi giełdowe
• jako środki do promocji programu Smart Coin Alliance

Liczba tokenów CTX wprowadzona do obrotu będzie miała wartość 188 000 000 

A jak będzie wyglądać Airdrop CTX?

Tak jak pokazywałem w przykładzie na początku posta za każde 60 GCC będzie można dostać 1 token CTX. Będzie on podzielony na 3 etapy wg schematu:

1. Styczeń, faza pierwsza: 50% zasobów posiadanych na portfelu,
2. Luty, faza druga: 25% zasobów posiadanych na portfelu,
3. Marzec, faza trzecia: 25% zasobów posiadanych na portfelu + podwójna premia dla posiadaczy długoterminowych.

Oczywiście nie ma żadnego przymusu brać udział we wszystkich 3 fazach, ale wtedy otrzymamy mniejsza ilość nowych tokenów odpowiadającą w ilu fazach braliśmy udział.Po każdej fazie GCC Group sprawdzi Twój balans coinów i na koniec airdropa dostaniesz odpowiednią ilość CTX do etapów, w których brałeś udział.

Jak wziąć udział w Airdrop CTX?

At the beginning of the visit  www.Caytrex.com  and click the link in the upper right hand corner of Get The Airdrop  as the picture below:

Page opens as follows:

1. If you want to come alive portfolio of web-based GCC select chcekbox Friday. Then there is a new form where you fill in only the fields 2 and 5
2. Give the address of your portfolio where you store the GCC coiny,
3. Give the address of your portfolio ETH. Airdrap after the completion of this portfolio will be transferred to your new tokens,
4. Enter your signature authentication GCC. The same thing we did when we would send its first GCC from the wallet. I described it in one of the older posts but then it was still the old portfolio so now I'll show it again on the new portfolio.
1. Go to the tab File and then click referrals sign message
   
2. in this window enter your GCC
   
3. enter your wallet ETH
4. Click the sign message.
5. copy the generated signature and insert it in the box on page 4 ctx.
5. Enter the email address is very important because to this email will be coming all the information about the project,
6. Accept the input and gain CTX

Check e-mail, follow the information in the middle of the registration process and confirm the airdropa  When all steps are done, you will get confirmation of correct registration airdropa

CTX tokens will be sent to you AFTER all 3 phases of the project

Is it worth it?

That nobody knows, but because I do not intend to sell their share of the GCC'll take it and see whether it will be worth it. On the other hand, what can I lose? Alternatively, only that suddenly the GCC will grow so much that I wanted to sell them. We will see

WHY GCC COIN DISAPPEARED FROM THE WALLET?

As the title all became clear, though these explanations probably many do not like.Of course, I also have mixed feelings 

After writing the third time to support the GCC received information that explained everything:

It follows that for a month blockchain did not work because the errors were found in the portfolio in the portfolio. Well, all right.I just wonder how it is that blokchain is locked and the portfolio further copies.   

Knowing all this, who had run portfolios for the period stated in the message must reckon with the fact that after his reinstallation whether the installation of new or old versions coins portfolio are those that dug in this period unfortunately disappeared. In my case it was some 40 transactions.  

I came to the conclusion that in spite of all these things can happen, but unfortunately probably not quite been presented early on this information GCC Group. 

Unless he missed something.

IMPORTANT INFORMATION REGARDING THE NEW PORTFOLIO OF GCC

Hello For some weeks GCC Group has released a new version of the portfolio, which I described in a previous post. Version 2.3.0.0 was to eliminate errors of the previous version. Of course, I installed wallet, but unfortunately there were problems:

This problem is "pernicious in my case 45 maining transactions" in the period from 6 October 2018 until 14 November 2018 year. Although the wallet was turned and kicked it, unfortunately, when you synchronize a new version of all transactions from this period they have been cut. 

I wrote to support the GCC and we are still in touch, but so far there is no solution to the problem. Well, I think the guys from the GCC will soon come up with something but I do wstrzymałbym to update the portfolio. 

I have not written right away because I thought that my case is individual but I think it is not. I keep my fingers crossed and hopefully as soon as something became clear. At the same time immediately after receiving new information from the GCC share them in future posts.

UPGRADING GCC WALLET TO 2.3.0.0

Hello

Recently, all community members have received the GCC mailbox information, which is as below.

Who has not noticed let you have a look to your e-mail inbox. Information says more or less that from 12 November 2018 a new version of a portfolio of GCC. 2.3.0.0 . It was introduced because of the errors found in the existing portfolio. Anyone who will now want to make some trades GCC will have to have installed a new version of the portfolio.

As for the portfolio he looks essentially the same as the previous version. The rules also its installation are the same. Starting from making copies of the portfolio and ending his re-uploading. Link to Post Updated portfolio

IS GCC COIN SEE ON THE NEW MARKETPLACE?

This question of a few days may ask themselves a community which in their portfolios has just this crypto. And what's going on? A no about it that was formed a kind of competition which currencies will be able to rotate on the stock exchange called CoinDeal .

And how to make our crypto found on the new marketplace? Very simply, so the one who has an account on CoinDeal let them vote for the GCC and the rest well zarejestrujmy and let us help to the GCC market extended its audience. So to share.

New website GCC Group

Today, information about which I knew while in the GCC in Przeźmierowo. Well, GCC Group has a new website.

Homepage looks pretty cool and let's see what you see after you log in:

Immediately you see the difference and it is significant.

1. Here we see the state of our account in EURO.
2. Successively the state of our GCC Coin coins which we received and we still have on the page.
3. Here we see the current valuation Coin in EUR.
4. At this point, we can see how many people are present at the moment we are in our upper leg.
5. The same applies to information about our lower leg.
6. At this point, we can buy for someone so-called gift in the form of ANY 3D packages.
7. Here is information about special offers we have prepared for the GCC Group.
8. This item informs about the accumulated points on our account PVC.

9. going into this field, we can learn a little about our payments. .
10. This field shows us our position in the structure SINC ..
11. Here we see the number of points gained BV in the upper leg.
12. Here we see the number of points gained BV in the lower leg.
13. In this field, we see the number of people directly referrals.
14. Here we can see if we are a member of the project with full privileges or not opłaciliśmy its AFFILIATE package.

As you can see page differs radically from the previous version. All the information we need, we have now in one place and basically immediately after logging in to your account. Reszce bookmarks can quietly view but are very clear and simple. 

I immensely enjoyed the fact that in the end after the mess I began to reign on the old version of the page something has gone forward and now everything is nicely arranged. Keep it up. Let's see whether we will see only language versions of the page GCC Group.

Vacation is over but the memories remain

Hello to all of you for quite a long time I did not write anything on your blog but I was on vacation. In his last post on GCC Group I wrote that the next time I'll try something surprise you. Well, today I can say that coming back from vacation and I was in Gdansk, Poznan decided to return for, and exactly as already probably guessed by Przeźmierowo or established GCC Group.

I came to Przeźmierowo on Thursday 23 August, unfortunately ride from Gdansk through Gniezno took me so much time that the company and the restaurants were already closed. Immediately for those who choose to see and participate in the reports that the company is open from Monday to piątko from 9.00 am to 17.00. Within the same time slot is usually open the 3D coffee located in the same building. Not discouraged by this I came to Przeźmierowo the next day when the morning. Here is my brief photo report:

The cafe was the daughter who just like I wanted to see how such a room, almost everything here is the fruit of the work of printers. Interestingly though my child does not ask why omieszkało juice which kopiliśmy in cafes and coffee are not printed. Maybe next time we are in Poznan that happens. 

As you can see in the pictures in many places in the pictures are shown a 3D printer

A glance here buffet: \

And of course the shop where you purchased the printer and components produced using them. in the third picture reflection of my daughter, who also snapping photos to show her friends.

A still image below the zone for employees only. Unfortunately, there is no longer walked. maybe if I had an appointment in advance but unfortunately I was unlucky because I tried several times to get through to the GCC, unfortunately, each time without success.

And now the final picture of a visit to the GCC Thank you for a very nice atmosphere with the person who told us a little bit about us about 3D cafes and provided us the possibility to see and take pictures. Thank you very much, and certainly at the next opportunity will definitely be attending more in Przeźmierowo.

And what it gave to me you ask? Exactly a lot because a man very different looks at the business in which to engage the touches that from the inside, tangibly see that it works and works and that it is the same only come there other people and also engage in work sometimes drinks coffee, they talk about their businesses and they just are. Since Friday, August 24 my outlook on the company GCC Group took on additional meaning and now I know that I'm a part of something real that in the near or slightly more distant future will pay off for me.

Two interesting new packages on offer GCC Group

I did not write anything long time because I do not see the topic about which I had to write about the GCC and the two finally began to take a vacation and that is an example of the little daughter doing 😃. Recently, however, they appeared in the shop the GCC offer two new training packages. They seem to be quite interesting. Briefly introduce each of them.

1. POWER-UP-6 - 6 package is training that takes a live one every month. On-line training have lead experts who are connected with GCC Group company. They cover various aspects of the business, among other things:
• sales training,
• product training,
• training in the field of 3D printing,
• training of crypto-currencies
• blockchain training.



Includes buyer receives:
• Six-month subscription - access to professional training 6 online live !,
• Additionally - free E-VOUCHER Coins the GCC to 70,000.
the person through which you purchased it receives:
• make 7000 the GCC,
• 94 points PVC
2. POWER-UP-12 - is a package of 12 courses, which take place at one time each month. On-line training have lead experts who are connected with GCC Group company. They cover various aspects of the business, among other things:
• sales training,
• product training,
• training in the field of 3D printing,
• training of crypto-currencies
• blockchain training.



Including the buyer receives :
• The annual subscription - access to 12 professional training online live !,
• Additionally - free E-VOUCHER Coins the GCC to 140,000.
whores person to make the purchase receives:
• 14000 to make the GCC,
• PVC 188 points,

There is important information about the two packages: 

• You can not buy them for GIFT Certificate
• before the number coins why is the word FOR? And because we have to get coins for purchasing products, the company will be buying in the market and their exact number will depend on the value of the GCC crypto-currency sales at the time of posting. As a result, GCC Group wants to increase turnover on the stock exchanges in the coin by its value. If you buy 1 package will be converted into coins amount of $ 200 in the case of 2 400 US dollars package. while 10% of these amounts will be converted into coins that sponsors get people who bought products.

That's it for today, now a longer break because going on a vacation and after him I might be able to surprise you, wait-see. Powodzonka.

The most interesting device printed in 3D

Because at the moment I do not have anything interesting to write about the projects in which I participate I decided to encourage to deepen their knowledge about what can be printed using a 3D printer. and they are really cool and interesting device:

Solar Stirling engine

It is a heat engine, which is known for quite a long time. Robert Stirling has developed and patented it already in 1816. This machine has won recognition only recently, however, through the use of solar energy conversion. If someone wants to put solar Stirling engine in your own home - no contraindications for doing so. The easiest way to buy a set of plans, for example, from RepRap windturbine , then use the 3D printer to prepare their own model. 

Car

Strati tojeden of several cars printed in 3D technology. Electric vehicle was developed by Local Motors . Obviously not all the vehicle has been printed. It was founded on the printer interior, a large part of the body and almost all the trim. The engine, chassis and electricity are derived from an external supplier. To perform the largest components were used for the professional large format printer, prepared specifically for this project. Scattering the up to 50 km / h, the car is available for sale since 2015.

Block of flats

Company Winsun is the first developer offering residential block printed in 3D. Five-storey building has been divided into apartments and rooms. Printed was also impressive façade, which imitates brick with granite finish. Of course, the printer is not out of the building immediately, but its elements in the form of prefabricated Winsun not print only the elements of woodwork or metal components.

As you can see, in principle, you can now be printed on almost all 3D printers. On the one hand, we know that such printing thi certainly time consuming, but on the other hand to carry objects made in this technology are needed less and less employees. 
Well, watching this stuff we must answer the question of whether we want to participate. I think that should be interested and the GCC Group gives ample opportunity for doing so.

It's probably the definitive end of World MX - Payments on hold

Unfortunately, after several days of operation MX World again he stopped payment. It turned out that the $ 40,000 paid by James was spread at a rapid pace, which to be honest he did not expect.

On the FB program can read information from James what to withhold payments. The following statement James made available by Janus on FB . 
So sadly wall to admit that this was probably the end of World MX. This is what I gathered there I will try to spend on advertising their platinum think at this point the only internet business that is GCC Group .

Well and it could be really interesting. A little sad because it's in all my first online business and I will always think of him with affection.

MX World pays again

Hello

Today, about which in truth I have little forgotten here, but it turns out that it starts to work again. I am talking about the MX World . While it descended because quite a few months but is once again available to the payment window.

Payments can be made in USD and EUR. At the moment the payment is frozen at BTC. At the moment there are three payment processors to payments:

• SolidTrustPay
• Perfect Money
• AdvCash

The amount of payments depends on the level that we have bought in the MX World. Minimum weave is 25 USD or EUR

As shown in the picture above the red arrow depending on the level at which we find ourselves, we can pay different amounts from 25 to 125 USD or EUR.

It's nice that after such a long time, something began to happen. I personally am sentimentally linked to the MX World because it's my first work Internet;). I hope that now everything will go forward. And how will, in fact, time will tell. 

GCC Group issued WHITE PAPER

Today, according to me important, and even very important information, so the company The GCC Group officially released something called Whitepaper . At the beginning I started to wonder what it is and whether it even makes sense. I began to search the internet thinking that maybe I encounter some information about the document and after a while I already had a few pages of a search engine. 

And what is that?

White paper- an official document containing systematized data on the area of ​​your business. Reports are to transmit customer information, and does not serve the sale or promotion. Marketing objectives are implemented as secondary by strengthening the profile of expertise and building brand awareness, which is the author of the study. White papers are written in an official, specialist - are of scientific studies. Outriggers to create them are research and analysis. The document must therefore expect the data, their systematization and interpretation. Systematize data for reports often use graphs and tables. They are usually reported the company's achievements in the area of ​​its activity. Informing about the results of the work builds brand credibility and generates trust of our customers. Very often people

By clicking on the picture you can download a whitepaper published by The GCC Group

At first I thought that he would try to translate this document, but while reading rump realize that this does not make much sense because sometimes poorly translated one word can change the meaning of an entire sentence, or even sometimes a paragraph. So I will say briefly. In the case of The GCC Group whitepaperis a summary of the company's development from its inception to the present, as well as plans for the future which the company intends to carry out.

You wonder if it's good?

In my humble opinion, of course it is because it shows the whole environment that the company has an idea for its development and wants to pursue posed in front of goals, and the resulting document gives everyone the ability to track achievements of the company and compare its achievements at the moment with folded in the whitepaper aims.

Well, so much for today and for the next post.

Interruption C-Cex

Today short, but quite important information for users of the exchange C-Cex. Now, from May 31 for a period of three months will be restricted functionality of the stock exchange. What does it mean that we do not know. It is known, however, that such periods have already occurred in the operation of the C-Cex. Last for a long time it was not possible to register, were also locked when deposits and withdrawals. 

I will say honestly that it might upset a little but if necessary you can always register on another stock exchange. Then we have the other 3 available exchanges on which you can rotate our GCC. Sisal about them in the previous post .

Cryptopia - Another GCC stock market exchange

Long did not write anything.

Maybe it's because I had a little moment other activities, but also because, again, that there was a period where not much was happening in the world of the GCC. What was the true event, but basically do not know if many people were interested in it, and basically what you had is probably participated in it. 

Now there was another step that is entering the GCC Coin on another stock exchange called Cryptopia . In fact, browsing the Internet I found a lot of information on this exchange.

I do not know whether the stock market is good. They write about it differently depending on what crypto rotate. Well, it is certain that our GCC is thus available to a new group of users who have their accounts on this has just the stock market. .

From now on our GCC it is available at:

1. NovaExchange ,
2. C-CEX
3. OctaEx
4. Cryptopia

I see it getting better. Let's keep our fingers crossed for crypto, but do not forget to promote the most important in the GCC namely printing and 3D packages.